amas

Sunday update

2/19/12

Today we worked on:

1. The fillets and taping around the beam to the hull intersection at the outer skin.

2. The foam wedges between the bulkhead assembly and the ama decks.

3. The backfill Nomex edges on the bulkhead assemblies.

4. Additional operations on the lower foil cassette panel.

Saturday work party

2/18/12

Gabe and Joe showed up to get a few things done.

1. The foil cassette panel, which supports the point-loading of the lower rollers using a core, which is a combination of airex foam and 1.5mm thick webs of carbon spaced 12mm apart.

2. Sea anchor deploy tunnel, which connects to and also drains the dry well storage area.

3. Secondary filleting and taping of the inboard ama hull halves.